This body mount brace had to be replaced so whatever was left was removed to allow the new body mount to be installed.This body mount brace had to be replaced so whatever was left was removed to allow the new A few years ago, you couldn't find these body mount braces. Fortunately, they're now readily available for '61-'64 Impalas.A few years ago, you couldn't find these body mount braces. Fortunately, they're now readi Once everything was bolted on and checked to make sure that they were where they need to be, everything was welded in place.Once everything was bolted on and checked to make sure that they were where they need to b The welds were ground down and the welded areas were cleaned using a high-power wire wheel.The welds were ground down and the welded areas were cleaned using a high-power wire wheel Fiberglass was used to fill and smooth the welds. The fiberglass also helps reinforce the sheet metal.Fiberglass was used to fill and smooth the welds. The fiberglass also helps reinforce the The body filler was applied, sanded smooth and shaped to create the flow that we wanted. Once all of the body work was done, they sprayed SEM etch primer and sealers to leave the car ready for paint.Once all of the body work was done, they sprayed SEM etch primer and sealers to leave the The restored floorboards were ready to be painted. SOURCE Cars Inc www.carsinc.com House of Pain West Covina CA Sem Paints www.sem.ws « | 1 | 2 | View Full Article By Saul Vargas Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
