As you know, LEDs on most cars are starting to come standard, so it was only a matter of time before someone stepped up and provided LEDs for older vehicles. Fortunately for us, Dakota Digital had the foresight to invest into the Impala market and produce an LED line for most of the classic Impalas. If you don't know who Dakota Digital is, they are known in the aftermarket world for custom digital gauges and retro kits.

When people hear about LED lights they assume that they are replacing the whole housing but the reality is Dakota Digital's LED lighting systems are engineered to utilize your existing wiring harness, taillight lens and assembly. The LED modules are included for both left and right rear brake lights. Dakota Digital taillights include the LED brake/taillight modules, wiring and moisture-resistant crimp-on connectors.

If your existing housings or lenses can't be cleaned or repaired, new replacement housings and lenses are recommended to get the best lighting possible. In our case the housings were in good condition but our lenses needed to be replaced. We called our friends at Classic Industries and they pointed us in the right direction and hooked us up on the taillights lenses that we used for this build. These new lenses will assure a brighter shine when the LEDs are being used.

Whether you have OEM wiring, or have updated to a new style harness, installation is effortless. Now let us show you how the pros at EG Auto Electric in Bell Gardens, California, wire up our Dakota Digital LEDs to our '68 Impala.

SOURCE
Classic Industries
18460 Gothard Street
Dept. CP
Huntington Beach
CA  92648
800-854-1280
http://www.classicindustries.com
Dakota Digital
4510 W. 61st St. N.
Sioux Falls
SD  57107
800-593-4160
http://www.dakotadigital.com