5.3 Engine Swap Part 2 - Rotolo Chevrolet

Our first trip to Rotolo Chevrolet got us the new cam shaft sensor and the new external style water tube.
Our first trip to Rotolo Chevrolet got us the new cam shaft sensor and the new external st
As soon as we took out the old water tube, the intake dropped in and bolted up with no problem.
As soon as we took out the old water tube, the intake dropped in and bolted up with no pro
The new LS1 tube runs externally and bolts up perfectly.

Milodon had all the new goodies for the LS engines.
After removing the stock truck oil pan you can see how much shorter the new Milodon pan is in comparison to the old one. This shortness will keep the oil pan from hanging below the frame.
After removing the stock truck oil pan you can see how much shorter the new Milodon pan is
We removed the oil pan gasket from the old pan and used it, as it was still good and re-useable.
We removed the oil pan gasket from the old pan and used it, as it was still good and re-us

The stock windage tray and pick up stick needed to be removed.
With the old tray off, the build was ready for the new Milodon accessories that were going to be replaced.
With the old tray off, the build was ready for the new Milodon accessories that were going
The new windage tray and oil pick up stick went on with ease.

The new oil pan is shallow and will also allow you to relocate your oil filter, keeping the filter from hanging below the oil pan.
The new oil pan is shallow and will also allow you to relocate your oil filter, keeping th
The ARP bolt kit kept the pan in place.
The conversion was coming together and the engine was starting to look like an LS engine.

SOURCE
Daves Goldenwest Auto Wrecking 6972 Garden Grove Blvd. Westminister 714-898-4343	Milodon Inc. 2250 Agate Court Simi Valley CA 93065 805-577-5950 www.milodon.com
Weiand www.holley.com	ARP Fasteners 1863 Eastman Avenue Ventura CA 93003 800-826-3045 www.arpfasteners.com