Stamping the job number on each bumper will allow a paper trail, which shows when the bumper came in, and when it was completed.Stamping the job number on each bumper will allow a paper trail, which shows when the bump The bumpers had the chrome stripped chemically. This allows the grinder to finish cleaning up the bumpers.The bumpers had the chrome stripped chemically. This allows the grinder to finish cleaning Going into the grinding process removes any and all of the old finishes. Goodmark has thousands of pattern libraries for factory/bumper specs. Goodmark has several grinders at work with different duties. Different sanding belts are used to remove the old plating. Removing the old plating is very important. Here is a look of the part where the chrome was removed off of it. The edges are repaired from being bent by bumper jack. Polishing has begun using different belts. Areas of concern are noted on the bumper for the polishing departments. Once the bumpers are polished, they are dipped in copper. « | 1 | 2 | 3 | » | View Full Article By Saul Vargas Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
