To give the bumpers that deep look once chromed, they need to be polished one last time.. The bumpers are racked and wired for the chrome plating process. The rack with the bumpers are rinsed in a chemical soap, which helps to degrease the bumpers.The rack with the bumpers are rinsed in a chemical soap, which helps to degrease the bumpe The bumpers are being platted with semi-bright. Next is the bright nickel. In between the process, the parts need to be rinsed to keep the tanks from contaminating. Coming out of bright nickel. The bumpers are rinsed. The bumpers are almost finished as they were lower into the chrome tank. Coming out of chrome solution, the bumpers look like they were gold-plated. The final rinse was done with water. Wipe down and inspection is complete before being shipped back. The bumpers are shipped back to the Goodmark distribution center in Norwalk where they were originally delivered and turned back in.The bumpers are shipped back to the Goodmark distribution center in Norwalk where they wer As you can see, the bumpers are completely refurbished and left with a show finish. The brilliant looking bumpers are ready to be picked up and bolted back onto the project car with a shine to last.The brilliant looking bumpers are ready to be picked up and bolted back onto the project c SOURCE Goodmark Industries 625 Old Norcross Road Suite E Lawrenceville GA 30045 770-339-8557 www.goodmarkindustries.com « | 1 | 2 | 3 | View Full Article By Saul Vargas Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
