8. Paul mixed up some candy blue for the panel. 9. The top panel was prepared by Frank, so the candy blue could be accented by the other colors.9. The top panel was prepared by Frank, so the candy blue could be accented by the other 10. This panel was almost complete, but needed a few paint tricks or designs.10. This panel was almost complete, but needed a few paint tricks or designs. 11. What would this panel be without a signature? 12. This panel was cleared and completed. 13. Frank and Mitch worked together well on this panel. 14. This panel was ready to dry and be buffed out. 15. Paul shows us that by using the same main colors that were used on Mitch's panel, something entirely different can be created. The panel was all masked up with design shapes and ready for paint.15. Paul shows us that by using the same main colors that were used on Mitch's panel, som 16. Every panel was going to be covered in color, so each section would be masked individually.16. Every panel was going to be covered in color, so each section would be masked individ 17. Once the last layer was masked off, Paul would be able to shoot some color.17. Once the last layer was masked off, Paul would be able to shoot some color. 18. Paul started off by doing some tiger stripe designs. 19. As you can see, these stripes were created by using up and down motions.19. As you can see, these stripes were created by using up and down motions. « | 1 | 2 | 3 | » | View Full Article By Saul Vargas Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
