Summit Racing Serpentine Belt Kit - AC Compressor Pulley

The crank pulley was the first pulley to be installed. This will allow us to see that the system and other pulleys are all lining up.
The crank pulley was the first pulley to be installed. This will allow us to see that the
The water pump pulley was tightened using an allen wrench.
The alternator was test-fitted before being tightened into position.

With plenty of room to spare, the alternator was tightened down to the front bracket, which serves as the foundation to the kit.
With plenty of room to spare, the alternator was tightened down to the front bracket, whic
Using an impact gun, the single wire amp alternator received a billet serpentine pulley and fan.
Using an impact gun, the single wire amp alternator received a billet serpentine pulley an
The AC compressor needed to be dressed, as it looks incomplete with out a billet clutch cover.
The AC compressor needed to be dressed, as it looks incomplete with out a billet clutch co

This billet cover for the AC clutch easily screwed into place, and gave the compressor a new complete look.
This billet cover for the AC clutch easily screwed into place, and gave the compressor a n
This pump went on with ease. The power steering pulley slipped on as it was placed with the pulley belt going on at the same time.
This pump went on with ease. The power steering pulley slipped on as it was placed with th
This engine was ready to be shown off, or driven to the local show, as it featured a fresh new look in just a few hours time.
This engine was ready to be shown off, or driven to the local show, as it featured a fresh