Next was the Professional Products air intake that will help the air flow mixture burn better.Next was the Professional Products air intake that will help the air flow mixture burn bet After removing the valve covers and inspecting the heads for carbonation, "T" then installed the chrome valve covers.After removing the valve covers and inspecting the heads for carbonation, "T" then install The engine accessory brackets were installed to start the serpentine set up. The secondary alternator bracket was installed, these brackets can be installed in any order.The secondary alternator bracket was installed, these brackets can be installed in any ord The corvette water pump was going to be used, with the water outlet pointing towards the radiator, instead of upward like the truck water pump does.The corvette water pump was going to be used, with the water outlet pointing towards the r The water pump went on, accompanied by the tension brackets. The Street and Performance air conditioning pump was fastened together without any problems and was dressed up with a chrome billet cover.The Street and Performance air conditioning pump was fastened together without any problem The alternator that had already been converted for a serpentine set up was mounted into place.The alternator that had already been converted for a serpentine set up was mounted into pl The power steering pump and bracket were mounted up. "T" laid out the fuel rails. These motor mount relocator brackets needed to be added. The motor mounts will easily bolt onto the adaptor plate.These motor mount relocator brackets needed to be added. The motor mounts will easily bolt Here is how the motor mounts look once the engine is dropped into the frame. Your car may need headers to make your exhaust work properly. Look at the extra room gained when using block hugger style headers.Your car may need headers to make your exhaust work properly. Look at the extra room gaine There are two different styles of fuel pumps. This one is built into the gas tanks. This is an external in-line fuel pump. If you do not plan, or only have a single fuel line for your car, you can use this style fuel filter that features a built-in pressure regulator and return line to the fuel tank. The benefit of this style of filter is that you can mount it close to your gas tank, which makes it easier to install.If you do not plan, or only have a single fuel line for your car, you can use this style f There are several wiring harnesses and computers on the market. This one will allow your engine to be "turn key" and helps eliminate the stock bulky harness originally used by GM on these engines.There are several wiring harnesses and computers on the market. This one will allow your e We hope you liked your crash course on LS engines. It's not as bad as you might think, so look for future builds this year as we plan to show you how to install an LS on a budget, as we build one up and go wild as we can go with it!We hope you liked your crash course on LS engines. It's not as bad as you might think, so « | 1 | 2 | View Full Article By Saul Vargas Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
