Lowrider Tech Article Pictures and Photos at LowRiderMagazine.com
Facebook

Fabrication Spot Welded

 
Fabrication Spot Welded

Sheet Metal Patchwork - Tech Project
The metal was spot welded in sections so that the metal would not warp from the heat. Once it had cooled off, the welds were ground down. Back to Article
Fabrication Replacement Sheet Metal Fabrication Exposed Metal Fabrication Marked Up Panel Fabrication Metal Tack Weld Fabrication Removing Rust Fabrication Patching Up Hole Fabrication Spot Welded
Fabrication Cleaning Off Residue Fabrication Spreading Fiberglass Fabrication Evercoat Z Grip Filler Fabrication Body Filler Fabrication High Build Sealer Primer Fabrication Filling Weld Fabrication Curing Fiberglass
Fabrication Sanded Filler Fabrication Final Coat Of Body Work Fabrication Pathwork Needed
Lowrider
Lowrider Magazine