Lowrider Tech Article Pictures and Photos at LowRiderMagazine.com
Facebook

Show Trunk Matching Curve

 
Show Trunk Matching Curve

Show Basics- Tech Project

The top panel was cut to match the curves of the rear trunk area and notched for the latch. Before the panel can be attached, it needs to be sealed. The center was marked off to ensure a proper fit as the sealing and nailing will be done outside of the vehicle. Back to Article
Show Trunk Parts Show Trunk Built For Functionality Show Trunk Trunk Stripped And Cleaned Show Trunk Cut Out Panel Show Trunk Strip Trunk Show Trunk Measurement Translated Show Trunk Test Fit Panel In
Show Trunk Working On Enclosure Show Trunk Carpenter Angle Finder Show Trunk Cutting Out Panel Show Trunk Complication Show Trunk Transition Show Trunk Complication Show Trunk Transfer Angle
Show Trunk Matching Curve Show Trunk Looking Back Show Trunk Transition Panel Show Trunk Confirming Angle Show Trunk Rounding Off Edges Show Trunk Coming Together Show Trunk Final Trunk
Show Trunk Need More Room Show Trunk Final Panel Show Trunk Wiring Box Show Trunk Second Rack Show Trunk Test Fit Show Trunk Ready To Go
Lowrider
Lowrider Magazine