The factory channel was drilled out to allow the wing windows to be rebuilt. The old felts were ready to be removed as they were letting in air, noise and dirt. The window felt was screwed in after the chrome trim was installed. The taillights were ready to light up the night or when hitting the brakes. The trunk was sealed and ready for the car to be washed. Last on the agenda was to seal the trunk. This gasket usually needs to be replaced as it's one of the first to wear out.Last on the agenda was to seal the trunk. This gasket usually needs to be replaced as it's The wing window seal gasket has to be put on after the wing window has been taken apart. The chrome quarter window frame needed to go in before the rest of the frame was put back together.The chrome quarter window frame needed to go in before the rest of the frame was put back The rear channel will keep the frame together. « | 1 | 2 | View Full Article By Saul Vargas Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
