These custom bolts hold the water pump in place and allow the second brackets to be bolted on.These custom bolts hold the water pump in place and allow the second brackets to be bolted Next up was to bolt on the Power Master alternator. The tensioner was next on the agenda. This tensioner evens out the belt's tension so we made sure that there's no slippage.The tensioner was next on the agenda. This tensioner evens out the belt's tension so we ma The harmonic balancer pulley was bolted on. The tensioner pulley cover was bolted on. The A/C pump was bolted on. The A/C pulley cover was one of the last items to go on. The water pump pulley was bolted to the custom water pump. The last thing that needed to be done was to add the belt that was provided with the kit. This completes a custom engine front end.The last thing that needed to be done was to add the belt that was provided with the kit. SOURCE GM Performance Parts www.gmperformanceparts.com Summit Racing Equipment P.O. Box 909 Akron OH 44309 Primo Restorations « | 1 | 2 | View Full Article By Saul Vargas Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!