Lowrider Tech Article Pictures and Photos at LowRiderMagazine.com
Facebook

454 Long Block Build Installing Cams

 
454 Long Block Build Installing Cams

454 Long-Block Build - Tech project
Jerry started off by installing the cam on the block. His method avoids doing damage to the lobes on the cam while installing. The cam was lubed with assembly lubricant to help protect it when the motor fires up dry for the first time. Back to Article
454 Long Block Build Block 454 Long Block Build Ready To Be Put Together 454 Long Block Build Installing Cams 454 Long Block Build Philliops Screwdriver Push In Cam 454 Long Block Build Crank Blown Dry 454 Long Block Build Main Baring Tie Down 454 Long Block Build Why Not Damage Cams
454 Long Block Build Getting Ready To Put On Bearing 454 Long Block Build Carnk Laid Into Position 454 Long Block Build Tighten Bolt Stud 454 Long Block Build Putting On Caps 454 Long Block Build Studs Lubed 454 Long Block Build Small Sprocked Fitting In 454 Long Block Build Bearing Caps Tightened
454 Long Block Build Piston Seals To Tolerance 454 Long Block Build Torquing Main Bearing Stud To 90 Lbs 454 Long Block Build Crank Needed A Key 454 Long Block Build Cpas Placed Into Crank 454 Long Block Build Hooking On Stud 454 Long Block Build Sprockets Lined Up 454 Long Block Build Pistons Cleaned And Prepped
454 Long Block Build Tapping Key Into Place 454 Long Block Build Pistons And Connecting Rods Assembled 454 Long Block Build Rings And Seals Put On 454 Long Block Build Piston 454 Long Block Build Torquing Down The Crank 454 Long Block Build Ready For Head And Intake 454 Long Block Build Piston Walls Wipe Down
454 Long Block Build Piston Clamp 454 Long Block Build Making It Stroker Motor 454 Long Block Build Plugging Up Necessary Holes 454 Long Block Build Using Mallet
Lowrider
Lowrider Magazine