Luxury Trunk - Audiotech - Lowrider Magazine

After cutting out the speaker opening, we add additional coats for strength.
Once we have a basic shape for our enclosure, we can start the framing for the trunk. Here the amplifier support is framed up and test fit.
Once we have a basic shape for our enclosure, we can start the framing for the trunk. Here
To close the gap from the amp rack to the side wall small framing pieces were cut. The final filler frame is now ready for finishing material.
To close the gap from the amp rack to the side wall small framing pieces were cut. The fin

Upholstery board was used to fill the gap from the amp rack to the side wall.
After completing the framing of the beauty panels, mold fabric was stretched around it and the entire opening of the trunk was masked off. Fiberglass resin is not friendly stuff. Be sure that the vehicle is properly protected as a single drop of resin could ruin your week. Notice a support brace was used to ensure that the panels would not shift during the curing process.
After completing the framing of the beauty panels, mold fabric was stretched around it and
With our amp racks built, we're ready to move forward with the beauty panels that will serve as the frame for the molding materials.
With our amp racks built, we're ready to move forward with the beauty panels that will ser

It was also used to provide a base for the rear of the trunk.
The trunk hinges on this vehicle made for another interesting twist. In addition to the traditional obstacle of the hinges themselves, these devils have an additional angle to them which forced us to create an even larger opening for clearance when closing the trunk.
The trunk hinges on this vehicle made for another interesting twist. In addition to the tr
The floor panel was built with a Plexiglas window to showcase the newly polished tank set. You'll notice that one panel was left removable for access to the battery location.
The floor panel was built with a Plexiglas window to showcase the newly polished tank set.

The panels have been removed and trimmed up. From here, we're off to the body shop to finish the trunk. See you at the show
The panels have been removed and trimmed up. From here, we're off to the body shop to fini
The flush panel can now be mounted to the amp rack.